Best Way to Attach Christmas Lights to House

February 20, 2022 Post a Comment

Download Article

Christmas lights tin bring a festive warmth to an otherwise boilerplate bedroom. If you're thinking of hanging lights in your room, there are many ways that you tin can achieve an attractive event.

1
Use battery-powered lights for simplicity and ease. Opt for battery lights over electrical lights to make things easier on yourself. Figuring out how to hang upward your lights can be tough when you have to worry about whether or not the right end of the strand will reach an outlet. Endeavour using battery-powered lights in your bedroom to make both hanging your lights and turning them on and off a scrap easier.^[1]
- When picking out battery lights, opt for ones with replaceable batteries and buy long-lasting batteries for them. This should make your lights final longer.
2

Untangle the lights and exam them before starting. Take your Christmas lights out of the box they came in and untangle them if necessary. If they're electrical, plug your lights into an outlet to make certain that they aren't broken. If they're battery-powered, flip the switch on your lights to see if they're damaged at all. Supplant any broken bulbs and throw away any frayed wires before proceeding.^[ii]

Advert
iii
Programme out how you'll hang your lights to make sure they're long enough. With pencil and paper, sketch out how you'd similar the lights to exist arranged. Utilize measuring tape to determine how long the calorie-free strand is and how far one wall is from the other. This will ensure that the lights will be long enough to mimic your sketch and besides reach the outlet, if the lights are electrical.
- Remember that you'll need to secure your lights where the ceiling intersects with the walls.
- Think virtually whether you want to outline the perimeter of your room with the lights, or string them across the room in a zigzag pattern from ane wall to another.^[3]
- If yous don't similar the manner information technology looks to have the end of the calorie-free strand going straight upward from the outlet, try hiding it behind a coat rack or arranging it artistically on the wall.
4
Utilise record or tacks to secure the lights to the wall. Get a scroll of transparent tape or a box of tacks and step up onto a stepstool or small stepladder. Secure one end of the light strand to an intersection signal on one of your chamber walls past placing a piece of tape over the wires or pushing a tack into the wall in between the wires. Keep to secure the strand at different points farther downwards until you've secured the entire strand.^[4]
- If yous're doing the perimeter style, secure a office of the low-cal strand with record or a tack and move 1–2 feet (0.xxx–0.61 m) beyond the wall with the strand. And then, secure the strand once more at that point.
- If you lot're doing the zigzag pattern, tape or tack the light strand to 1 wall and move to the other side of the room with the strand. Then, secure the strand to that wall.
- If you're using tacks, don't push through the wires with the tacks. This may crusade damage to the wiring, and as a result, intermission the electrical circuit and ruin the lights.
Advertisement

1
Purchase and exam 2 boxes of 300 Christmas lights. Take the lights out of their packaging and untangle them if you demand to. And then, plug them into an electrical outlet if they're electrical lights and flip the switch to turn them on if they're bombardment-powered. Supersede and/or repair whatever issues before moving frontward.^[5]
- Either electrical or bombardment-powered lights will work for this projection. However, bombardment-powered lights may exist easier to work with because you don't have to worry about plugging them in.
two
Buy sheer curtains and a mantle rod. Pick out a ready of white sheer curtains that you like and purchase them. Then, pick out a curtain rod that's width is every bit close as possible to the width of your bed.^[6]
- Twin size beds are 38 inches (97 cm) broad.
- Full size beds are 53 inches (130 cm) wide.
- Queen size beds are sixty inches (150 cm) wide.
- King size beds are 76 inches (190 cm) wide.^[7]
iii
Mensurate and mark where yous'll hang your curtain rod. With measuring tape, mensurate 1–ii feet (0.thirty–0.61 thou) below the ceiling above where your bed is located and mark the wall lightly with a pencil. To make sure it'due south centered over your bed, subtract the width of your bed from the length of the drapery rod, or vice versa. Then, split up the deviation by 2. This is how much space you should have on either side betwixt where the mantle rod ends and the edge of the bed is. Mark these 2 spots with your pencil.
- For case, if yous're bed is 38 inches (97 cm) wide and your curtain rod is 50 inches (130 cm) broad, then your should have 6 inches (15 cm) between the finish of the curtain rod and the border of your bed on either side.
iv
Hang the curtain rod . Install your curtain rod just as you would install it above a window. Drill starter pilot holes with a drill while holding the bracket upward to the 2 marks that indicate where the ends of your curtain rod should exist. Then, spiral the screws into the holes with a screwdriver.^[8]
- For all-time results, apply a level to make sure the drape rod is straight.
- If you lot can't brand holes in your wall, attempt installing ii Command hooks that have a heavy weight capacity that are large enough to agree the curtain rod.
5

Put 16-xx damage-free hanging Command hooks under the curtain rod. One time the curtain rod is secure, evenly space the Command hooks across the wall. To do this correctly, read the directions on the packaging. You'll likely need to printing the dorsum of the adhesive against the wall, peel off the the piece of paper on the front end, and then push button the claw against the front of the adhesive.^[9]
6
Pall the lights upwardly and around each Control hook. If your lights are electric, plug them in to ensure they'll be long plenty, feed the strand up to the the first hook, and hook information technology on. If your lights are battery-powered, simply claw 1 stop of the strand onto the first hook. So, drape the strand downwards the wall. Once you lot've almost reached the flooring, feed the strand upward towards the next claw and repeat.^[x]
- Continue doing this until you lot've strung the lights upwardly around each claw.
- If y'all take battery-powered lights, don't worry virtually flipping the switch to turn them on before you first hanging them. This is but necessary for electrical lights.
7

Hang upward your curtains. The sheer curtain volition appear to slightly blur the lights and assist your faux headboard to appear solid. Remove the mantle rod and push it through the hole that'south across the top of your sheer curtains. Hang the curtain rod back up and accommodate the defunction and so that they're evenly spaced.^[11]

Advert

1
Purchase, untangle, and test a strand of Christmas lights. Later you've bought a box of lights, take them out and unravel them. Plug them into an outlet if they're electrical and flip the switch to turn them on if they're battery-powered. Check all of the bulbs to brand sure they're working. Fix any that aren't, or get a new strand of lights.^[12]
- one 100-light strand should be enough for this project.
2
Hang 2 columns of Command hooks on your wall close to either edge. Since yous'll be making a zigzag pattern on your wall with the Christmas lights, you'll demand to install damage-free hanging Command hooks that are spread out and staggered in height. Read the instructions and install the hooks equally directed.^[thirteen]
- You should exist able to install the hooks by pressing the back of the adhesive against the wall, pulling off the paper on the front of the adhesive, and pressing the back of the hook to it.
- If y'all accept an especially long light strand, create more than distance between the two columns of hooks. If you have a shorter strand, create less distance between the 2 columns.
3

Drape your lights from claw to hook. If your lights are electrical, plug them in and bring them upwards towards the highest claw you installed. Otherwise, simply hold ane end of a strand of battery-powered lights at this hook. Feed the strand through the hook and pull it carefully towards the highest claw on the other side of the wall. Hook the strand on this claw and and then pull the strand dorsum to the other side. Go along doing this until y'all've made a zigzag through all of the hooks.^[14]
4
Use clothespins to secure your favorite photos to the light strand. Pick out some of your favorite photos and hang them just below the calorie-free strand by securing them to information technology with a small clothespin. You can also hang up other items, such equally concert tickets or drawings, to add together a personal touch.^[15]
- If y'all opt to hang other things, stick with pocket-size, sparse items that are fabricated of paper. Otherwise, the lights may fall downwards and/or pause as a outcome of having to hold up the heavy weight.
Advertizement

Add together New Question

Question

How do you stick Christmas lights to a wall?

This answer was written by one of our trained team of researchers who validated it for accurateness and comprehensiveness.

wikiHow Staff Editor

Staff Answer

If you don't want to utilize nails, try attaching the lights to adhesive hooks or clips. You might also be able to get them to stay up with a few pieces of transparent record spread out along the string. Picture hooks, nails, or heavy-duty staples will also piece of work if you don't mind making holes in the wall. If you use staples, brand sure the prongs of the staple go around the cord and not through it!
Question

How practice you hang the lights without damaging the wall?

This answer was written by one of our trained team of researchers who validated information technology for accurateness and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Adhesive light clips are a relatively non-damaging option. If you've recently painted your walls, make sure the paint has had fourth dimension to fully cure first (typically this takes almost seven days). Adhesives can besides damage wall paper, so this might not be the all-time selection if your room has papered walls.
Question

What do you practice with old Christmas lights?

This answer was written by one of our trained team of researchers who validated it for accurateness and comprehensiveness.

wikiHow Staff Editor

Staff Respond

In many areas, you can recycle Christmas lights. Check with your local municipal waste office, or ship your sometime lights to a company that reclaims old holiday lights, such equally Holiday LEDs or Christmas Light Source.
Question

How do I hang lights without nails?

Endeavor using painter'south tape, thumbtacks or staples. Different solutions may work for attachment to different surfaces; just experiment until you observe something that works.

Inquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Thanks for submitting a tip for review!

If you aren't comfy with handling power tools, ask someone to aid y'all hang upwards the mantle rod.
Electric Christmas lights can cause fires when they malfunction. Always be sure to unplug your lights before y'all get to sleep and before you get out your home.

Advertizement

Things Y'all'll Demand

Christmas lights
Pencil
Paper
Measuring record
Transparent tape or tacks
Stepstool or stepladder

Christmas lights
Sheer curtain
Curtain rod
Measuring tape
Pencil
Drill
Screwdriver
Screws
Level (optional)
Impairment-gratuitous hanging Command hooks

Christmas Lights
Damage-free hanging Control hooks
Photos
Clothespins

Most This Commodity

Article Summary 10

Before you hang your Christmas lights from the ceiling, create a blueprint sketch of how you want your lights to look. You tin attempt hanging them around the perimeter of your room, or creating a zigzag blueprint across the ceiling! Then, mensurate the room and make sure your lights are long enough to comprehend the whole distance. Hang your lights where the walls meet the ceiling with pieces of transparent tape or by pushing tacks between the wires at evenly spaced points. If you desire to make a faux headboard or hang photos on your Christmas lights, roll downward!

Did this summary help you?

Thanks to all authors for creating a page that has been read 62,907 times.